Difference between pages "Netiquette" and "Registering your MCLA ID BlazerPrint"

From TechHelp@MCLA
(Difference between pages)
Jump to: navigation, search
en>Helpdesk
m (Protected "Netiquette" [edit=sysop:move=sysop])
 
 
Line 1: Line 1:
−
For a more complete discussion, refer to "The Net: User Guidelines and Netiquette" by Arlene H. Rinaldi, Florida Atlantic University, 1998, which is available [http://www.cs.biu.ac.il/home/leagal/netguide/netiquette.html here].  
+
Every BlazerPrint copier is equipped with an RFID reader that is compatible with your MCLA Photo ID. Users can login to the copier using their MCLA Photo ID to unlock the ability to release their print jobs from the BlazerPrint virtual print queue as well as use scanning, copy and fax features. Users must 'register' their MCLA Photo ID with the BlazerPrint system. '''This only needs to be done once to associate the card with your MCLA account for authentication purposes'''. Here are the steps on how to register your card.
  
−
Further, all users of the network at Massachusetts College of Liberal Arts have a responsibility to use the network and its Internet connections in a manner that will not abuse the privilege of network access, will not annoy or harass other users and will not waste resources. E-mail is a function that requires particular care in this regard. Behavior:
 
  
−
*E-mail may not be used to harass, insult, or bother other users.  
+
*1. 'Tap' your MCLA Photo ID on top of the RFID Reader on the Copier.
−
*Mail may not be posted to multiple users unless all recipients will be interested in the message.  
+
[[image:printreg1.jpg]]
−
*Be careful not to reply to a list when you meant to reply to the original sender.  
+
*2. You will be prompted to “Associate your Card”.
−
*Do not use foul or obscene language; e-mail is not always private.  
+
[[image:printreg2.jpg]]
−
*Do not send chain letters or other "junk mail."
+
*3. Select the “Yes” button in the right-hand corner to begin registration.
−
*Do not forward personal mail without the sender's permission.  
+
[[image:printreg3.jpg]]
−
*Keep lines and messages short and to the point.  
+
*4. You will be prompted to enter your MCLA User ID (A number without @mcla.edu) and Password.
−
*Cite all quotes and sources.  
+
[[image:printreg4.jpg]]
−
*Capitalize words only for emphasis. Capitalization is "shouting" in e-mail.  
+
*5. Hit the “Done” key in the right-hand corner after each item is entered.
−
*Be careful when using humor or sarcasm. Without face-to-face communication your intention may not be recognized.  
+
*6. Once complete your card will be “successfully registered”.  
−
*Use abbreviations where appropriate, such as :-) as a "smiley face" to show humor.  
+
*7. If the information you entered is not correct you will be prompted to try again.
−
 
 
−
==Housekeeping:==
 
−
 
 
−
Check your e-mail daily. Senders assume you are receiving their messages.
 
−
Delete unwanted messages immediately. Keep stored messages to a minimum to save disk space.
 
−
If you receive files or are sending files be sure to virus check your system frequently.
 

Revision as of 03:09, 9 February 2023

Every BlazerPrint copier is equipped with an RFID reader that is compatible with your MCLA Photo ID. Users can login to the copier using their MCLA Photo ID to unlock the ability to release their print jobs from the BlazerPrint virtual print queue as well as use scanning, copy and fax features. Users must 'register' their MCLA Photo ID with the BlazerPrint system. This only needs to be done once to associate the card with your MCLA account for authentication purposes. Here are the steps on how to register your card.


  • 1. 'Tap' your MCLA Photo ID on top of the RFID Reader on the Copier.

Printreg1.jpg

  • 2. You will be prompted to “Associate your Card”.

Printreg2.jpg

  • 3. Select the “Yes” button in the right-hand corner to begin registration.

Printreg3.jpg

  • 4. You will be prompted to enter your MCLA User ID (A number without @mcla.edu) and Password.

Printreg4.jpg

  • 5. Hit the “Done” key in the right-hand corner after each item is entered.
  • 6. Once complete your card will be “successfully registered”.
  • 7. If the information you entered is not correct you will be prompted to try again.
Retrieved from "https://techhelp.mcla.edu/index.php?title=Netiquette&oldid=7174"