Connecting your personally owned device to BlazerPrint (Students)

From TechHelp@MCLA
Revision as of 23:40, 9 February 2023 by A10001222 (talk | contribs) (For Windows Users:)
Jump to: navigation, search

The following instructions will walk you through the process of setting up the 'BlazerPrint' virtual printer queue on your personally-owned laptop. Once set up, you can send print jobs to the queue and release them from any BlazerPrint copier on campus.

NOTE: These instructions are designed for personally owned devices. MCLA Faculty/Staff who are using MCLA-owned devices should review these instructions instead.

For Windows Users:

  • 1. Ensure your laptop is connected to the oncampus MCLA network, preferably Eduroam.
  • 2. Download the Mobility Print Installer located here.
  • 3. Run the installer once fully downloaded.
  • 4. Windows prompt will ask you for permission to make changes to your computer; Click “Yes”
  • 5. Select a language, then click “Ok”

Mobility1.png

  • 6. Click “I accept the agreement” then click “Next”

Mobility2.png

  • 7. “BlazerPrint” should appear in the list of printers. Select “BlazerPrint”, then click “Next”

Mobility3.png

  • 8. Sign in using your A number and password, then click “Next”

Mobility4.png

  • 9. If done successfully, a page will appear saying that the Mobility Print Setup has been installed. Click “Finish”

Mobility5.png

  • 10. BlazerPrint should now appear in the list of printers when attempting to print

Mobility6.png

For Mac OS Users:

  • 1. Ensure your laptop is connected to the oncampus MCLA network, preferably Eduroam.
  • 2. Navigate to System Preferences > Printers and Scanners.
  • 3. Click the ‘retry’ icon under the Printers List. The Add dialog is displayed. It displays a list of all of the discovered printers on the network.
  • 4. Select a "BlazerPrint' printer that uses the Bonjour protocol.
  • 5. At the bottom of the dialog box, check that Use is set to Secure AirPrint.
    • Note: If Secure AirPrint isn’t displayed, close the add dialog then disconnect from the network. Reconnect to it again.
  • 6. Click Add.
  • 7. Print your document. When prompted, enter your MCLA A number and password.