Included in Every BlazerPrint copier is equipped with an RFID reader that is compatible with your MCLA Photo ID. Users can login to the copier using their MCLA Photo ID to unlock the original package you were sent ability to release their print jobs from Dell there should be a whitethe BlazerPrint virtual print queue as well as use scanning, cardboard cd-sleeve copy and fax features. Users must 'register' their MCLA Photo ID with 5 CDs in itthe BlazerPrint system. These CDs will restore your computer '''This only needs to be done once to exactly associate the state it was in when it was first shippedcard with your MCLA account for authentication purposes'''. You can also have Here are the HelpDesk restore steps on how to register your laptop for you, but it will have to be left at the HelpDesk in Mark Hopkins for at least a few hourscard.
To get started:*Save anything you want to keep to a CD, USB Pen Drive, etc1... All 'Tap' your MCLA Photo ID on top of your data will be erased if you do not.*Locate the CD-Rom package and insert RFID Reader on the first disc in your computer's CD-Rom driveCopier.*Shut-off your computer*Turn on your computer[[image:printreg1.jpg]]*Once you see the Dell logo appear on the screen, press F12 to open the boot menu2.*You should now have the option to select different boot devices. If not, shut the computer off and repeat the last step until the boot menu appears. If Windows begins to load, you can still power off the computer. After all, you will be erasing the driveprompted to “Associate your Card”. *Once you have the boot menu, you should select "CD/DVD/CD-RW" and hit enter[[image:printreg2.jpg]]*Once 3. Select the “Yes” button in the computer has booted, you should be prompted right-hand corner to run the "CFI System Restore"begin registration. *Press "M" at the first screen[[image:printreg3.jpg]]*From the "Recovery Menu" make sure "Restore The System" is highlighted and press your "Enter" key4.*You will be asked prompted to confirm enter your selectionMCLA User ID (A number without @mcla.edu) and Password. NOTE[[image: This is the last point at which you will still be able to recover your files. If you are not sure whether or you have everything you needprintreg4. STOP!jpg]]*If you are sure that you want to continue, press 5. Hit the "R" “Done” keyin the right-hand corner after each item is entered.*This process takes about an hour6. During the restore process you Once complete your card will be asked to insert each of the five discs in sequence“successfully registered”. When prompted, remove the current CD and replace it with the subsequent one*7. Once If the disc information you entered is in the drive, press the "Enter" key to continue.*After the last disc has completed, not correct you will be able prompted to shut off your computer and boot directly into Windowstry again.
