All standard sized classrooms are enhanced for computer and multimedia presentations by inclusion The following instructions will walk you through the process of a PC and projectorssetting up the 'BlazerPrint' virtual printer queue on your personally-owned laptop.Additional network Once set up, you can send print jobs to the queue and video connections are provided for carry-in laptops. Laptops already configured for use release them from any BlazerPrint copier on the main campus LAN or wireless network may use these hookups to control the projectors in these rooms. Other laptops needing network access will require advance arrangements with Computer Support. See also [[Guest Network Access]].
Scheduling'''NOTE: The RegistrarThese instructions are designed for personally owned devices. MCLA Faculty/Staff who are using MCLA-owned devices should review these instructions instead.'''s office, 102 Eldridge Hall, x 5216
*LCDT = LCD Television*PROJ = [[Epson Proj|Projector]]*COMP = Instructor Station Computer*VSWR = Video Switching System*DCAM = Document Camera*RCAM = PTZ Room Camera<youtube>j0LHSuG-Ewo</youtube>
<table border=1 cellspacing=2 cellpadding=3><tr style="background-colorFor Windows Users:#88DBDF><td>Room</td><td>Seats</td><td>Notes</td><td colspan="6">AV Equipment Guide</td></tr> <tr style="background-color:#88DBDF><td colspan="9">Bowman:</td></tr>*1. Ensure your laptop is connected to the oncampus MCLA network, preferably Eduroam. <tr><td>[[BH102]]</td><td> </td><td>Robotics Lab</td><td> </td><td>*2. Download the Mobility Print Installer located [https://files.support.epsonpapercut.com/docid/cpd5/cpd50675.pdf PROJ]</td><td> </td><td>VSWR</td><td> </td><td> </td></tr> <tr><td>[[BH106]]</td><td> </td><td>Hardware Lab</td><td> </td><td>PROJ</td><td> </td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[BH119]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM<products/td><ng/tr><!mobility-- <tr><td>[[BH119B]]<print/td><td> </td><td>Conference Room</td><td>LCDT</td><td> <download/td><td> <client/td><td> <windows/td><td> </td><td> </td></tr> --> <tr><td>[[BH120here]]</td><td> </td><td>Software Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>. <tr><td>[[BH122]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>*3. Run the installer once fully downloaded. <tr><td>[[BH124]]</td><td> </td><td>Faculty Center</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td> *4. Windows prompt will ask you for permission to make changes to your computer;</td></tr>Click “Yes” <tr><td>[[BH201]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>*5. Select a language, then click “Ok” <tr><td>[[BH202image:mobility1.png]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[BH203]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>*6. Click “I accept the agreement” then click “Next” <tr><td>[[BH204image:mobility2.png]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[BH205]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>*7. “BlazerPrint” should appear in the list of printers. Select “BlazerPrint”, then click “Next” <tr><td>[[BH206image:mobility3.png|300px]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[BH207]]</td><td> </td><td>Seminar Room</td><td>LCDT</td><td> </td><td>COMP</td><td> </td><td> </td><td>RCAM</td></tr>*8. Sign in using your A number and password, then click “Next” <tr><td>[[BH208image:mobility4.png|300px]]</td><td> </td><td>Lecture Room</td><td>LCDT</td><td> </td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[BH217]]</td><td> </td><td>Conference Room</td><td> </td><td> </td><td> </td><td> </td><td> </td><td> </td></tr> <tr><td>[[BH218]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[BH220]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[BH222]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[BH302]]</td><td> </td><td>Painting Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td> </td></tr> <tr><td>[[BH303]]</td><td> </td><td>Design/*9. If done successfully, a page will appear saying that the Mobility Print Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td> </td></tr>Setup has been installed. Click “Finish” <tr><td>[[BH304]]</td><td> </td><td>Drawing Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td> </td></tr> <tr><td>[[BH305image:mobility5.png|300px]]</td><td> </td><td>Sculpture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td> </td></tr> <tr><td>[[BH315]]</td><td> </td><td>Computer Graphics</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>*10. BlazerPrint should now appear in the list of printers when attempting to print <tr><td>[[BH319]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td> </td></tr> <tr><td>[[BH324]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr style="background-colorimage:#88DBDF><td colspan="9">Campus Center:</td></tr> <tr><td>[[Sullivan ]]</td><td> </td><td>Lounge</td><td> </td><td>PROJ</td><td>COMP</td><td> </td><td> </td><td> </td></tr> <tr><td>[[CC324]]</td><td> </td><td>Conference Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td> </td></tr> <tr style="background-color:#88DBDF><td colspan="9">Church Street Center:</td></tr> <tr><td>[[CSC101mobility6.png|300px]]</td><td> </td><td>Recording Studio</td><td> </td><td> </td><td>COMP</td><td> </td><td> </td><td> </td></tr> <tr><td>[[CSC201]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[CSC202]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[CSC204]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td> </td></tr> <tr><td>[[CSCAudit]]</td><td> </td><td>Auditorium</td><td> </td><td> </td><td> </td><td> </td><td> </td><td> </td></tr> <tr><td>[[CSC Social Hall]]</td><td> </td><td>Lounge</td><td> </td><td> </td><td> </td><td> </td><td> </td><td> </td></tr>
<tr style="background-colorFor Mac OS Users:#88DBDF><td colspan="9">CSI:</td></tr> <tr><td>[[CSI109]]</td><td> </td><td>Intro*1. Ensure your laptop is connected to the oncampus MCLA network, preferably Eduroam. Physics Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr> <tr><td*2. Navigate to System Preferences >[[CSI113]]</td><td> </td><td>IntroPrinters and Scanners. Biology Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr> <tr><td>[[CSI117]]</td><td> </td><td>Intro*3. Click the ‘retry’ icon under the Printers List. The Add dialog is displayed. EnviIt displays a list of all of the discovered printers on the network. Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr> <tr><td>[[CSI121]]</td><td> </td><td>Large Classroom</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>*4. Select a "BlazerPrint' printer that uses the Bonjour protocol. <tr><td>[[CSI124]]</td><td> </td><td>Classroom</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>*5. At the bottom of the dialog box, check that Use is set to Secure AirPrint. <tr><td>[[CSI207]]</td><td> </td><td>Phys**'''Note:''' If Secure AirPrint isn’t displayed, close the add dialog then disconnect from the network. AdvReconnect to it again. Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr> <tr><td>[[CSI209]]</td><td> </td><td>Biology Fume Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr>*6. Click Add. <tr><td>[[CSI217]]</td><td> </td><td>Biology Molecular Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr> <tr><td>[[CSI301]]</td><td> </td><td>Chemistry Adv*7. Print your document. Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr> <tr><td>[[CSI307]]</td><td> </td><td>Lab / Conference Room</td><td> </td><td> </td><td> </td><td> </td><td> </td><td> </td></tr> <tr><td>[[CSI309]]</td><td> </td><td>Chemistry Organic Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr> <tr><td>[[CSI313]]</td><td> </td><td>IntroWhen prompted, enter your MCLA A number and password. Chemistry Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr> <tr><td>[[CSI317]]</td><td> </td><td>Biology General Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr> <tr><td>[[CSI320]]</td><td> </td><td>Psychology Research Lab<=For IOS Users (Iphone/td><td>LCDT</td><td> </td><td> </td><td> </td><td> </td><td> </td></tr> <tr style="background-colorIpad):#88DBDF ><td colspan="9">G49</td></tr> <tr><td>[[G49]]</td><td> </td><td>Design Lab - OFFLINE</td><td> </td><td>PROJ</td><td> </td><td> </td><td> </td><td> </td></tr><tr style="background-color*1. Open the app you want to print from and tap the share icon:#88DBDF><td colspan="9">History House:</td></tr> <tr><td>[[HH]]</td><td> </td><td>History House Conference Room - OFFLINE</td><td> </td><td>PROJ</td><td> </td><td> </td><td> </td><td> </td></tr><tr style="background-colorFile:#88DBDF><td colspan="9">Murdock:</td></tr> <tr><td>[[M108Shareiosprint.png|100px]]</td><td> </td><td>Lab </td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[M109]]</td><td> </td><td>Lab</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[M119]]</td><td> </td><td>Lab</td><td> </td><td>PROJ</td><td>COMP</td><td> </td><td> </td><td>RCAM</td></tr>*Scroll down and tap <tr><td>[[M120File:Print-icon.png|100px]]</td><td> </td><td>Writing Lab</td><td> </td><td>PROJ</td><td>COMP</td><td> </td><td> </td><td> </td>></tr> <tr><td>[[M201]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>or <tr><td>[[M202]]</td><td> </td><td>Seminar Room</td><td> </td><td>PROJ</td><td>COMP</td><td> </td><td> </td><td>RCAM</td></tr>Print. <tr><td>[[M203]]</td><td> </td><td>MultiNo print option? Check the app's User Guide or Help -Media</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>not all apps support printing. <tr><td>[[M208]]</td><td> </td><td>Fitzpatrick Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td> </td></tr> <tr><td>[[M218]]</td><td> </td><td>Dennis Sammer Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td> </td></tr>Select a printer. <tr><td>[[M213]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[M216]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[M301]]</td><td> </td><td>Lecture Room Long Table</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[M302]]</td><td> </td><td>Seminar Room</td><td> </td><td>PROJ</td><td>COMP</td><td> </td><td> </td><td>RCAM</td></tr> <tr><td>[[M303]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr> <tr><td>[[M320]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr>Select the number of copies and other options, like which pages you want to print. <tr><td>[[M321]]</td><td> </td><td>Seminar Room</td><td> </td><td>PROJ</td><td>COMP</td><td> </td><td> </td><td>RCAM</td></tr> <tr><td>[[M322]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td>RCAM</td></tr><tr style="backgroundTap Print in the top-color:#88DBDF><td colspan="9">Mark Hopkins:</td></tr>right corner. <tr><td>[[MH110]]</td><td> </td><td>Student Lounge</td><td>LCDT</td><td> </td><td> </td><td> </td><td> </td><td> </td></tr> <tr><td>[[MH109]]</td><td> </td><td>Avid Room</td><td> </td><td>PROJ</td><td> </td><td> </td><td> </td><td> </td></tr> <tr><td>[[MH210]]</td><td> </td><td>Education</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td> </td></tr>If you're prompted, enter your MCLA A number and password. <tr><td>[[MH212]]</td><td> </td><td>Education</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td>DCAM</td><td> </td></tr><tr style="background-colorFor ChromeBook Users:#88DBDF><td colspan="9">Venable:</td></tr> <tr><td>[[VH1]]</td><td> </td><td>Lecture Room</td><td> </td><td>PROJ</td><td>COMP</td><td>VSWR</td><td> </td><td>RCAM</td></tr> <tr><td>[[VH3]]</td><td> </td><td>Offline</td><td> </td><td> </td><td> </td><td> </td><td> </td><td> </td></tr> <tr><td>[[VH5]]</td><td> </td><td>Offline</td><td> </td><td> </td><td> </td><td> </td><td> </td><td> </td></tr> <tr><td>[[Costume]]</td><td> </td><td>Costume Room</td><td> </td><td> </td><td> </td><td> </td><td> </td><td> </td></tr> <tr><td>[[Dance]]</td><td> </td><td>Dance Theatre</td><td> </td><td> </td><td> </td><td> </td><td> </td><td> </td></tr> <tr><td>[[GreenRoom]]</td><td> </td><td>Offline</td><td> </td><td> </td><td> </td><td> </td><td> </td><td> </td></tr> <tr><td>[[Theatre]]</td><td> </td><td>Auditorium</td><td> </td><td> </td><td> </td><td> </td><td></td><td> </td></tr></table>
